Fire Hydrant
4 Way Breeching Inlet
  • 4 Way Breeching Inlet4 Way Breeching Inlet
  • 4 Way Breeching Inlet4 Way Breeching Inlet
  • 4 Way Breeching Inlet4 Way Breeching Inlet

4 Way Breeching Inlet

FUXEON's® 4 way breeching inlet is specifically designed for large fire sprinkler systems and dry riser systems. It allows firefighters to connect four fire hoses simultaneously, providing more water for firefighting.
    BS 5041 Part 3 · BS 336 · DN100

    4 Way Breeching Inlet — DN100 Internal Threaded Interface for Dry and Wet Risers

    The manufacturing of the DN100 internal threaded interface for the 4 way breeching inlet complies with BS 5041 PART-3:1975 standard, and the four DN65 instantaneous connectors comply with BS336 standards. The valve body is made of ductile iron with high strength and good impact resistance. The internal components (valve seat, valve stem, check valve parts) are made of bronze, offering excellent corrosion resistance and reliable sealing, and are equipped with a cover and chain.

    • EN-GJS-450-10 ductile iron body
    • Bronze seat, stem and check parts
    • 30 bar factory hydro test
    • FBE coating to AWWA C550
    4 way breeching inlet DN100 with four BS336 instantaneous inlets, flanged outlet, cover and chain
    BS 5041-3Manufacturing standard
    4 × BS336Instantaneous inlets
    30 barFactory hydro test
    0–40 ℃Working temperature

    Main Parts and Material

    Every component of this siamese breeching inlet is selected for long service life in harsh fire protection environments. The durable ductile iron body absorbs impact shock during transport and installation, while the bronze internals keep the check valve seats tight after thousands of operating cycles.

    Part Material
    Body Ductile iron as EN-GJS-450-10
    Blank Cap PE / Rubber, 4 pcs
    Drain Valve 1" brass gate valve as BS 5154
    Inlet Copper alloy BS 1400, 4 pcs
    Inlet Chain SS304 stainless steel
    Drain Valve Cap Brass as BS CZ121

    Technical Parameters

    Item Specification
    Standard BS 5041-3
    Inlet 4 × BS336 (4 × 2.5" BSP)
    Outlet Flanged as EN 1092-2, DN65, PN16
    Test Factory hydro test 30 bar (3 MPa)
    Temperature 0 ℃ to 40 ℃
    Surface FBE coating as AWWA C550

    Why Choose Us

    01

    Closed-Loop In-House Production

    FUXEON® owns its own processing equipment, with fully controllable product quality and precision. From advanced machining to assembly, everything is completed in a closed loop inside our China factory, and product prices stay competitive.

    02

    Quality Control on Every Batch

    Our 4 way breeching inlet connection uses the casting material standard ductile iron as EN-GJS-450-10. Each batch undergoes a visual inspection to ensure the surface is smooth and free of sand holes, pores and cracks, and a 3 MPa hydrostatic test is conducted to assess the strength of the valve body.

    03

    Customized and OEM Options

    Customized coating colours, connector configurations, nameplates and packaging are available for OEM and project orders. Tell us your drawing or reference standard and we will match it.

    04

    Discount for Volume Orders

    A discount is available for distributor and project quantities. Share your annual demand and our sales team will prepare a tiered quotation together with the delivery schedule.

    Want to see the full production and testing process? Visit our factory profile or check related fire fighting equipment.

    Working Principle of the 4 Way Breeching Inlet

    1. Firefighters connect one end of the fire hose to the fire truck's water tank, and the other end to the breeching inlet.
    2. Fire truck pumps deliver pressurized water, providing water sources for the internal pipelines and sprinkler systems of high-rise buildings.
    3. The check action of the breeching inlet prevents water from flowing back from the pipe network.
    4. Firefighters then use fire hoses connected to the landing valve on the burning floor to extinguish the fire.

    Before the fire station fills the water supply, the dry-type riser is empty, so the inlet of the dry-type riser is the only water supply source. For wet risers or sprinkler systems, the water inlet serves as the backup water supply for the pump. 

    Working principle diagram of the 4 way breeching inlet feeding a dry riser system

    Maintenance

    Regular servicing of the siamese breeching inlet valve is essential to ensure its continuous and effective operation.

    • Check whether each inlet cap is intact and still blocks dust and other debris.
    • Inspect the inlet for any signs of damage or wear.
    • Clean debris or deposits from the inlet thread and sealing face.
    • Test whether the inlet check function is working properly.
    • Confirm the chain, cover and drain valve operate freely.

    Application Scenarios

    Breeching inlets are mainly used in places where fire trucks need to deliver large amounts of firefighting water to the internal fire pipelines of buildings.

    • High-rise buildings
    • Industrial plants
    • Logistics warehouses
    • Petrochemical facilities
    • High-risk industrial facilities
    • Wet and dry riser systems

    The final determination should be based on the design flow rate, pressure, interface standards of the building fire protection system and local fire safety codes. Our engineers can assist with selection — just send your system parameters through the contact form.

    4 way breeching inlet installed in a fire cabinet of a high-rise building

    FAQ

    Q: What is a 4 Way Breeching Inlet?

    A: The 4-Way Breeching Inlet has four water inlets equipped with standard instantaneous male connectors and an internal check function, allowing water to be filled or pressurized to dry riser systems to achieve fire extinguishing.

    Q: How do I install the 4-way breeching inlet?

    A: Four-way water inlet joints are usually installed in fire cabinets on the ground floor of buildings, with internal connections to the dry riser main pipe. This pipeline must run vertically through the building to facilitate water supply to the upper levels.

    Q: Is the 4-Way Breeching Inlet suitable for wet risers?

    A: Of course, it can be divided into dry and wet systems based on the fire extinguishing network within the building.

    Q: What is its packaging like?

    A: Carton packaging, one piece per carton. Customized packing marks are available for OEM orders.

    Q: What is its unit price?

    A: We are manufacturers with competitive prices. Get a price by contacting us, and a discount is available for volume orders.

    Q: Which standards does this breeching inlet comply with?

    A: The DN100 internal threaded interface is manufactured to BS 5041 Part 3, the four DN65 instantaneous connectors comply with BS 336, and the flanged outlet follows EN 1092-2.

    Q: Can the coating colour be customized?

    A: Yes. Standard surface finish is FBE coating as AWWA C550, and customized colours are available on request.

    Get a Quotation for Your Project

    Send us your flow rate, pressure and interface requirements, and our team will reply with a customized solution, drawing confirmation and delivery schedule.

    Send Inquiry
    Contact Info
    If you have any enquiry about quotation or cooperation, please feel free to email or use the following inquiry form. Our sales representative will contact you within 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept