A fire monitor is only as good as the system behind it. The FUXEON® fire monitor for firefighting systems is engineered to slot into a complete fire protection system — pump, piping, hose, foam supply and monitor working as one chain. It delivers a rated flow of 40 L/S (634 GPM) at 0.8 MPa through a 2.5" inlet available in GOST, STORZ, Instantaneous and NH configurations.
Because the inlet can be specified to match the local hose and coupling standard, the monitor can be integrated into new installations or added to existing plants without reworking the water supply side. The result is a portable unit that behaves like a designed-in component of the system.
Quick Specifications: Model PSY8/40WB-FX | Rated Flow 40 L/S (634 GPM) | Rated Pressure 0.8 MPa | Max Shooting Range ≥65 m | Inlet 2.5" GOST / STORZ / NH (Optional)
In a typical industrial fire protection system, water moves from the source through a fire pump, into a distribution main, out through a fire hydrant or a hose connection, along a fire hose, and finally through the monitor nozzle. Each link in that chain has a pressure and flow rating, and the monitor is designed to sit at the end without becoming the bottleneck.
For foam-based systems, the monitor is paired with a foam bladder tank and proportioning equipment so that the same nozzle delivers finished foam rather than plain water. The wide spray mode (up to ≥90°) is particularly effective for foam application because it lays down an even blanket instead of drilling a hole in the fuel surface.
|
Component |
Role in the System |
Related Product |
|
Fire pump |
Provides the 0.8~1.0 MPa working pressure |
|
|
Hydrant / water supply |
Delivers water from the main to the hose connection |
|
|
Fire hose |
Carries water from the supply point to the monitor |
|
|
Hose coupling |
Joins hose sections and connects to the monitor inlet |
|
|
Foam bladder tank |
Supplies foam concentrate for finished-foam discharge |
|
|
Monitor nozzle |
Converts pressure into jet distance and spray pattern |
This unit |
|
Item \ Model |
PSY8/40WB-FX |
|
Rated Working Pressure (MPa) |
0.8 |
|
Working Pressure Range (MPa) |
0.8~1.0 |
|
Rated Flow Rate (L/S) |
40 |
|
Max. Shooting Range (≥M) |
65 |
|
Max. Fog / Spray Angle (°) |
≥90 |
|
Elevation Angle (°) |
+30~+70 |
|
Horizontal Rotation Angle (°) |
≥20 |
|
Inlet Connection |
2.5" GOST, STORZ, Instantaneous, NH, etc. (Optional) |
FUXEON® fire monitor bodies are mostly made of high-strength aluminum alloy, which is 2–3 times stronger than ordinary aluminum alloy, rust-proof, corrosion-resistant, and pressure-resistant. This allows them to withstand harsh environments such as high temperatures, humidity, and corrosive fumes in fire scenes, resulting in a long service life. Some manufacturers use plastic materials, which are extremely prone to breakage during use.
Every unit is pressure-tested before shipment, and our certifications cover UL, FM and CCCF standards. For system designers, that means the monitor can be specified alongside other certified components without creating a compliance gap. The 360° rotating base and the +30° to +70° elevation range also make it straightforward to define the monitor's coverage envelope on a system drawing.
Fuxeon Fire-Fighting Technology Co., Ltd. was established in 2004. After more than two decades of rapid development, we have built a comprehensive fire protection product system covering water spray, fire water supply, fire hose, foam extinguishing, fire extinguishers, industrial fire protection and more. A fire monitor for firefighting systems can be integrated with:
A: Yes, provided the pump can deliver 0.8~1.0 MPa at the monitor's flow demand. The monitor is a downstream component and does not require a dedicated pump.
A: The monitor is fed with finished foam solution from the proportioning device. The wide spray mode lays down an even foam blanket, while the straight jet is used for long-distance application.
A: Match the inlet to the hose and coupling standard used in the plant or region — GOST, STORZ, Instantaneous or NH. Specifying the wrong standard creates an avoidable adapter dependency.
A: Our certifications cover UL, FM and CCCF standards, and every unit is pressure-tested before shipment. See the certificate page for details.
A: Yes. The portable unit extends coverage to areas the fixed monitors cannot reach, such as behind bunds, at loading bays or in narrow access lanes.
A: A stable, reasonably level surface, a hose connection point within reach, and a fixed anchor for the auxiliary safety belt. Elevation and rotation limits should be marked on the coverage drawing.
Planning a firefighting system? Talk to FUXEON® about integrating the right monitor.
OEM / ODM available · No MOQ · Ships to 50+ countries