Fire Hydrant
KPA Fire Hydran
  • KPA Fire HydranKPA Fire Hydran
  • KPA Fire HydranKPA Fire Hydran

KPA Fire Hydran

The FUXEON® KPA fire hydrant is a device that connects to underground fire hydrants. Its function is to open or close the hydrant and connect fire hoses to provide water to fire and rescue departments. This fire hydrant is suitable for temperate, cold, and tropical climates and meets the installation requirements specified in GOST 15150-69 standard.

The KPA fire hydrant is primarily cast aluminum with a threaded bottom housing that can be screwed into an underground fire hydrant. The top of the housing is bolted and equipped with two DN80 coupling valves for connecting two 80mm diameter fire hoses. Each hose can use an independent valve. For connecting smaller diameter fire hoses, two-way or three-way adapters or reducers can be used, allowing the use of smaller diameter fire hoses (DN 50 or DN65).

 

Technical Parameters:

Material

Aluminum

Sealing Ring

EPDM

Working Pressure

1.6MPa

Inlet Size

DN125

Outlet Size

DN80

Weight

15kg

Operating Temperature

-5℃~35℃

Burst Pressure

4.8MPa

Production Standard

GOST 7499-95

KPA Fire Hydran

Why choose us?

As the original manufacturer of fire hydrants, FUXEON® has its own production line, ensuring quality control. Our Russian type fire hydrant strictly comply with GOST 7499-95 and are offered at competitive prices. We also support customization and can quickly respond to large orders and urgent supply needs for engineering projects.

KPA Fire HydranKPA Fire HydranKPA Fire Hydran

Working principle of 2 way fire hydrant:

Install the 2 way fire hydrant onto the fire hydrant connector and tighten it to the end. Connect the fire hose and then turn the switch on top to open the underground fire hydrant valve, filling the 2-way fire hydrant with water. This may take some time, during which you will hear the sound of liquid flowing. After the sound stops, turn the valve handwheel to start supplying water to the fire hose.

KPA Fire Hydran

How to maintain a 2 way fire hydrant?

After use, to ensure the KPA fire hydrant functions properly, rinse it with clean water and let it air dry. Inspect its appearance and ensure that all connections are undamaged.


FAQ:

Q: How to pack it?

A: Pack it using a wooden pallet, or pack it according to your requirements.

Q: Does the product meet the standards?

A: Yes, we manufacture according to GOST 7499-95 standard, and the product is suitable for environmental use under GOST 15150-69 standard.

Q: How should I store it?

A: It should be stored in a closed place or a place with good natural ventilation, or in a shaded place that avoids direct sunlight.

Q: How long is its warranty period?

A: We provide replacement parts for repairs within one year of its initial use.

Q: Can I get a sample?

A: Of course, we offer samples for all our products.


Send Inquiry
Contact Info
If you have any enquiry about quotation or cooperation, please feel free to email or use the following inquiry form. Our sales representative will contact you within 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept